MAINTENANCE
13
BODY
BIKE
®
I N DOOR C YC L E
ADJUSTMENT HANDLE
Every 3 months the handles
need cleaning and grease to
protect the parts from sweat,
dust, dirt and water.
1: Remove the adjustment
handle and disassemble the
handle completely into a
screw, a spring, a handlegrip,
a main screw and a brass
washer, see figure 15.
2: Clean all the parts
thoroughly one by one using
a steel brush. If the residue
is extreme, a sharp object
can be used, for example a
screwdriver.
Figure 15
WASHER
MAIN SCREW
HANDLEGRIP
SPRING
SCREW
SIDEWARDS PLAY IN
POSTS
Front post
1: Remove the right service
hatch by loosening the locks
with the coin, see figure 10.
2: Adjust the screw marked
S1 by using a 3 mm Allen
wrench, see figure 13.
Seat post
1: Remove the seat post
2: Remove the handle, the
M30 screw and the brass
inset with a 32 mm wrench.
3: Remount the seat post
4: Carefully lift up the top cover
as shown on figure 14. Adjust the
righthandside screw marked S2
with a 3 mm Allen wrench.
5: Push the top cover back in place.
5: Remove the seat post and re-
mount the brass inset, M30 screw
and the handle
6: Remount the seat post
Please note:
The adjustment has to be very
subtle in order for the post still
to be able to move up and down.
Figure 13
Figure 14
S1
S2
BRASS INSET
M30 SCREW
HANDLE
