4
www.bodine-electric.com
PRODUCT SPECIFICATIONS
ABOUT THIS PRODUCT
—Bodine’s Model 1865 is designed to provide
variable speed control of standard Permanent Magnet DC motors. Adjustable
acceleration and deceleration are provided, making the drive suitable for soft
start applications. The full-featured drive is easy to install and operate. Simple
trim pot adjustments eliminate the computer-like programming required on
other drives. However, for most applications, no adjustments are necessary.
Table 1 – Electrical Ratings
Parameter
Specification
Input Volts
115 or 230 VAC +/- 10%, Single Phase, 50/60Hz
Max. Continuous Input Current
3.4 Amps RMS
Output Volts
0 to 90 VDC or 0 to 180 VDC
Max. Continuous Output Current
2.1 Amps DC
Max. Peak Output Current
5.1 Amps DC
Max. Form Factor
1.6
Maximum Motor HP
1/5 HP @ 90V
1/3 HP @ 180V
Table 2 - General Performance Specifications
Parameter
Specification
Factory Setting
Speed Signal Input Voltage
0 – 5 VDC (must be isolated from
AC line)
N/A (speed pot)
Minimum Speed Trim Pot
Range
0 – 50 VDC output to motor with
input speed signal set at 0 VDC
0 VDC (full CCW)
Maximum Speed Trim Pot
Range
60 – 100% of full motor speed with
input speed signal set at 5 VDC
100%
Acceleration Trim Pot Range
.2 – 10 seconds to ramp output
voltage up from 0 to 90 VDC and
.2 – 20 seconds to ramp up from 0
to 180 VDC
2 sec. (0-90V) 4 sec.
(0-180V)
Deceleration Trim Pot Range
.2 – 10 seconds to ramp output
voltage down from 90 to 0 VDC
and .2 – 20 seconds to ramp down
from 180 to 0 VDC
2 sec. (90-0V) 4 sec.
(180-0V)
Peak Current Limit Trim Pot
Range
0 to 200 – 250% of motor name-
plate rating with appropriate DIP
switch settings
200 – 250% (full CW)
Speed Regulation (Change in
motor speedfrom no load to
full load)
Less than 2% of Rated Speed with
most motors and less than 1%
with many
1 – 2%
Operating Temperature
Range
0 to +40OC
N/A
