21
TABLE OF CONTENTS
I - INITIAL VERIFICATION
Thank you for choosing a BODET clock. This product has been carefully designed for your
satisfaction based on ISO9001 quality requirements. We advise you to read this manual
thoroughly before attempting to manipulate the clock.
The installation and the maintenance service of this clock has to be done by skilled person.
These indicate important comments.
Keep this booklet during all the life of your clock, so that you can refer to it each time it is
necessary.
1.1 Unpacking the clock
Unpack with caution and check the contents of the packaging. It must contain :
- The Cristalys 14 clock clipped on to its wall holder,
- For batteries version, 4 x 1,5 volt batteries, type LR 14,
- A fixation kit (2 2 rawlplugs),
- A cleaning kit (impregnated antistatic cloth)
- This booklet..
Remark
: when unpacking, some segments of the clock can be activated. This is not a default,
insert the batteries, or connect the low voltage power supply and after a few seconds the
problem will disappear.
Versions :
A descriptive label is fixed to the back of the clock :
Version designation
Independent quartz
Radio-synchronised by a DCF antenna
Minute, 1/2 minute, Irig-B or
AFNOR NFS-
87500A
receiver
DHF receiver
Battery operated
Powered by a low voltage source 6 to 24V AC/DC
IND QZ
X
X
RAD DCF
X
X
AF/IMP PILE
X
X
AF/IMP +6/24V
X
X
DHF
X
X
Bodet accepts no responsibility for accidents resulting from any use not conforming with
the above provisions.
Any modification to the product will invalidate the warrantee
.
