Bodet BTX6015 Installation And Operation Instructions Manual Download

Page: 5 / 6

V - Electrical connections

1/ Plug in the panel power cord to the 240V/110V power outlet.

2/ Connect the “goal lights module” to the Bodet ice hockey main scoreboard (RS485 communication)

This connection will allow the “goal lights module” to synchronise itself with the scoreboard in

order to display the game clock stopped.

GOAL

TIME

Power cord

Goal indicator panel

To main scoreboard

panel card and “goal

lights module”

Terminal block

of the main scoreboard.

RS485

Summary of Contents for BTX6015

Page 1: ...77 40 Fax 02 47 29 77 41 www bodet sport com Ref 607638B Upon receipt always check the product for damage during shipment If any is found you may file a damage claim with the carrier GOAL Indicator for ice hockey Installation and operation instructions ...

Page 3: ... push button Note The power cord supplies the power to the panel The handheld Start Stop push button turns on a GOAL Led indicator 1 indicator per impulse II Overview of the product Red Led GOAL indicators Green Led Clock stopped indicators Mounting clamps Power cord Handheld Start Stop push button Goal indicator panel ...

Page 4: ...m screws and matching plugs on the wall and slide the panel over the 4 screws The screws and plugs are not supplied by Bodet IV Clamp mounting 1 Place the panel on its support 2 Secure the panel in its position by tightening the 2 clamps with the hand knob screws ...

Page 5: ...e Bodet ice hockey main scoreboard RS485 communication This connection will allow the goal lights module to synchronise itself with the scoreboard in order to display the game clock stopped GOAL TIME Power cord Goal indicator panel To main scoreboard panel card and goal lights module Terminal block of the main scoreboard RS485 ...