7
3 - SETTING THE MELODIES
The Melodys sounder includes 16 melodies in the standard configuration.
By default, melody number 16 is played
.
To access the sounder controls,
unscrew the screw (3) under the
sounder and remove the access flap
by pulling it forwards.
The “MEL” key is used to select a
melody (from 1 to 16). This key also
allows to change the melody playing.
The “VOL” key is used to adjust the
volume from 1 to 8.
The “TST” key starts the test and stops a sounder. The volume is validated.
To adjust the volume of all the melodies at the same time:
- Press the “Vol” button for 10 sec,
- When “d5” is displayed select the volume level (from1 to 8) by pressing the “Vol”
button the appropriate number of time,
- Press “Tst” to adjust the volume for all the melodies.
Each time the melody is played, the
number of the melody is displayed (D).
The green dot (C) at the bottom right of
the readout indicates that the melody
being played is a melody contained in
the memory of the Melodys system.
The Melodys sounder support SD card and SDHC card.
An “Optional” SD Card is available to record and play other melodies (mp3 file format).
The melodies on this SD Card replace the basic melodies of the sounder. They can
be recorded directly by the user from a PC.
The SD Card must be formatted FAT
16.2 GB maximum.
The 16 pre-recorded melodies of
the Melodys can be replaced by new
MP3 files recorded on a SD card.
The digital format of the audio files
is MP3.
The names of the files on the SD
Card must be 01.mp3 to 16.mp3.
It is possible to replace totally or partially the 16 melodies.
Each melody registered on the SD card will replace the existing
melody. In case a melody is missing on the SD card the standard
melody will be executed.
The melodies recorded on the memory card have to respect copyrights. Please refer
to the current laws in your country.
9
7
8
D
C
