2
Index
1 - MECHANICAL INSTALLATION
2
2 - ELECTRICAL INSTALLATION
3
2.1 - Configuration Wireless DHF/Wired
3
2.2 - « Wireless DHF » mode installation
3
2.3 - « Wired mode » installation
5
3 - SETTING THE MELODIES
7
4 - TECHNICAL CHARACTERISTICS
8
When proceeding to the installation, do not forget to select the
triggering mode of the Melodys: «wireless DHF» or «wired», see page
3.
1 - MECHANICAL INSTALLATION
Ensure that power will be available
where the sounder will be installed.
To open the casing of the sounder,
unscrew the screw (3) under the
sounder and remove the cover; remove
the 2 screws (1),
Carefully remove the front panel and
disconnect the loudspeaker cable.
Secure the sounder in its location. Make
sure that the sounder is placed flat against
the wall to prevent
vibration.
Imperative: the equipment must
be switched on only after fixing,
programming of the DHF circuit number
and reinstalling of the front panel.
1
3
5