Material Lift LMX / LHX
105000017
15
•
When using crane fork extensions or bulky loads, the maximum load must be reduced
in proportion to the load centre.
•
The material lifts can be used outside enclosed spaces in the following conditions:
- Load
: 0 kg up to a maximum of 500 kg
- Wind force
: Use up to a maximum of wind force 3 (Beaufort scale)
- Surface of load
: lengthways (of the chassis)
: 1.25 m²
: crossways (of the chassis) : 1.00 m²
When lifting loads with large wind-exposed areas (i.e. air ducts, metal containers),
operations must be discontinued correspondingly earlier.
•
Daily:
- the wire cable and the cable guidance (pulleys, pulley displacements)
- correct winding of the wire rope on the rope drum
- the crane fork
- the rail profiles
- the rail guide (plastic rolls)
- the chassis with the front components
- the manual winch or the hydraulic winch
- Hydr. functional components (e.g. hoses, screw fittings, motor, brakes, and
similar)
- the castors and wheels
- the fixing elements (e.g. screws, nuts and bolts)
- the outriggers with the supporting spindles
need to be checked.
In case of damage or signs of damage immediately discontinue operation. Check the entire
unit for deformation or damage, corrosion or oxidation and tears in welding seams or
components.
•
Always carry out an inspection prior to commissioning.
•
Always carry out a functional test prior to commissioning.
•
It is strictly prohibited to modify the unit in such a way that the safety may be adversely
affected or that the official safety regulations are breached.
•
These operating instructions are expressly a part of the material lifts and must always be
kept with the units.
•
The stickers on the material lift must be clearly visible and recognisable in terms of
content (text and pictures).
