Böcker Ab 286, Operating Instructions Manual, Page: 28 / 50

Toplift / Toplift ECO
28 92023200095
8 WARRANTY
The warranty period of the TOPLIFT is 12 months
from the supply date.
The conditions for claims are: defective construction,
faulty material or faulty execution. Such defects have
to be reported immediately to the supplier in writing.
Replaced parts become property of the supplier.
Damage caused by natural wear cannot be claimed.
No warranty is given on the damage caused by:
•
Faulty use or application.
•
Faulty assembly of the hoist.
•
Faulty or careless treatment, in particular in re-
gard to these operating instructions.
•
Excessive use and
•
By the use of inappropriate equipment or spare
parts.
If the products are sent to our factory for repair and if
damages occur due to faulty packaging, they will be
at buyer’s expense.
9 MAINTENANCE
9.1 Maintenance intervals
General
The TOPLIFT has to be checked, depending on
the operation frequency, at least once a year by a
competent person.
Make sure that replaced parts are disposed in a
safe way in accordance with the requirements of
environmental protection.
The maintenance comprises visual checks, func-
tional checks and cleaning.
The intervals are indicated as follows:
w weekly
3 M 3- monthly
12 M annually
Description w 3 M 12 M Activity Comments
Instruction and load labels X Visual check
legibility
Drive Unit X Functional check
Upper limit switch X Functional check
Lower limit switch X Functional check
Electrics X Functional check
Supply line X Visual check
Rope X
Visual check
Breakage of strands, birdcaging, cor-
rosion, kinks, squeezing see chapter 9.3
Broken rope device X
Functional check see chapter 9.7
Pulleys carriage
X
Functional check
Pulley head
section
X
Functional check
Pulleys bend section
X
Functional check
The pulleys have to be cleaned of
concrete and mortar.
Slack rope device
X
Functional check
The slack rope device has to be regu-
larly cleaned of concrete and mortar
so that it is always operative.
Extensions
screws/nuts
condition of welds
X
X
X
Visual check
Visual check
Visual check
External electric terminals on
the drive unit x
Visual check
Periodic checking and testing
by
the operational safety or-
der in accordance with BGV
D7
X Testing by a competent person
Sea appendix