BOCK floorline 9.5 80, Assembly And Operation Manual, Page: 25 / 44

25
floorline 9.5|80 can be easily extended and adapted to fit the need of the individual pa-
tient. It is really easy: The completely ergonomic and true bed extension is carried out in
the blink of an eye. The side rails are provided for all lengths.
The result: Comprehensive comfort!
floorline 9.5|80 ready for use
Remove all packaging and transport brackets
from the bed and place the parts of the bed on
a free and flat surface. The screws of the
transport brackets are needed for the assembly
of the bed.
Place the lying surface flat on the floor.
(1) Plug the end piece with the narrow intake in
the extension slide on the foot side of the lying
surface, connect the supplied hexagon socket
screws (M8x25) and tighten firmly.
(2) Screw the galvanized angle brackets also
with the hexagon socket screws (M8x20) to the
end piece.
(3) Unscrew the cross-head screws from the end
piece and screw them to the pull-out made of
aluminium of the longitudinal frame. Tighten, if
necessary, the threaded rod too, which is lo-
cated on the bottom of the longitudinal frame.
Next, screw the end piece with the broad intake
into the supporting girders at the head end and
screw it together with hexagon socket screws
(M8x25). The appropriate screws are located in
the rectangular bar at the intake. Next, repeat
step (3) on the head part.