Boca Bocamodem M144EW, User Manual, Page: 59 / 84

59
Break Control . Determines the modem response when a
BREAK is received from the DTE or the remote modem. The
values of the parameters vary based on the three following
conditions:
(1) When a break is received from the DTE during NORMAL or
MNP mode:
AT\K0, 2, 4 modem enters command mode without sending
a break to the remote modem.
AT\K1 modem clears the terminal and modem buffers
and sends a break to the remote modem.
AT\K3 modem does not clear the buffers, but sends a
break to the remote modem.
AT\K5 modem sends a break to the remote modem in
sequence with any transmitted data. (DEFAULT)
(2) When a break is received from the remote modem during
NORMAL mode:
AT\K0, 1 modem clears the terminal and modem buffers
and sends a break to the local DTE.
AT\K2, 3 modem does not clear the buffers but sends a break
to the local DTE.
AT\K4, 5 modem sends a break in sequence with any data
being buffered. (DEFAULT)
(3) When a break is received from the DTE during DIRECT
MODE mode:
AT\K0,1,3 modem sends a break to the remote modem and
enters command mode.
AT\K2, 4, 5 modem sends a break to the remote modem.
(DEFAULT)