Boca BASIC VGA VGA006, Installation Manual

Page: 9 / 40

9
Section Three: Physical Installation
Installation of the Basic VGA is simple and quick for the expert and
novice alike. The following instructions assume an AT-style or
compatible machine. Obviously, locations and types of screws as well
as type of case cover will vary based on your particular system. Refer
to your computer system documentation for additional assistance.
3.1 Removing the System Cover
1. Turn the power switch to the OFF position.
2. Remove the power cord from the back of the computer.
3. Unplug the keyboard cable found in the lower middle of the
computer’s rear panel.
4. Use a small screwdriver to remove the screws that attach the
computer’s cover to the rear panel.
5. Carefully slide the cover forward—away from the rear panel. Be
careful not to let the cover catch on internal cables to the disk drive
and power supply.
è
Physical Installation