27
Driver installation
1. After you are satisfied that your basic AutoCAD (standard VGA)
installation is complete, exit AutoCAD and Run the install program
on the Basic VGA driver diskette as explained in E.2 (page 19).
Choose the AutoCAD release 10 drivers when prompted.
2. After driver installation, make the AutoCAD subdirectory current and
type the following to load the driver:
BVGAADI [ENTER]
3. Start AutoCAD (ACAD [ENTER]).
4. At the first menu, select option 5 (CONFIGURE AUTOCAD). At
the next menu, choose CONFIGURE VIDEO DISPLAY and ADI
DISPLAY v4.0. At this point you are offered a number of options.
Press [ENTER] for each option to select the default offering until
you are returned to the Configuration menu. Now select option 0
(EXIT TO MAIN MENU), confirm the changes, and exit AutoCAD.
Using the Driver
Start AutoCAD, using the following sequence of commands:
CD\ACAD10
[ENTER]
BVGAADI
[ENTER]
ACAD
[ENTER]
You may incorporate these commands into a batch file for convenience.
Other options are available when the driver is invoked by typing
optional parameters. If you type: BVGAADI? [ENTER], you will get
the following help and status message which describes these options:
Drivers and Utilities
Summary of Contents for BASIC VGA VGA006
