23
If you do NOT have an analog modem
, just assign DN 2 to
the AUX1 port exclusively for a handset.
To assign directory numbers to AUX ports, via command line,
refer to the WEBGLIDER Reference Guide (Section Four, p. 23).
5. Check the “High Speed Com Port” box ONLY if you have a
serial port with a 16C650 UART.
6. Check the “Divert Calls to AUX1 Port” box. By doing this, an
incoming call can be diverted to the other AUX port by using
the Divert Calls feature. If you check the ”Divert Calls to
AUX1 Port” box while you are using DN 1 for a data call, an
incoming call on DN 1 will ring on the device plugged into
the AUX1 port.
• Click OK to finish.
