12
I n s t a l l a t i o n
1. Connect the output from the power supply lead to the socket
marked 'PWR' on the back panel of the WEBGLIDER. Do not
plug the power adapter into the AC outlet yet.
Safety Statement
Use only the power supply shipped with the product.
2. Use the supplied serial cable to connect the port marked ‘RS-
232’ to your PC or other terminal device. The WEBGLIDER
is wired as a DCE allowing modem cables to be used;
information on types of cables and their pin-out assignments
required is provided in Appendix B: Cable Connections in
the WEBGLIDER Reference Guide.
3. Connect the socket marked ‘ISDN U’ on the back panel to the
ISDN network using the supplied phone-type cable. The
ISDN network normally terminates with an eight-way RJ-45
socket. This socket is similar to a standard telephone (RJ-11)
cable, but it is wider, with 8-10 wires instead of four.
Note: WEBGLIDER will not work if connected to an NT1 or
any other device providing an S-interface to ISDN.
