13
Safety Statement
Do not install telephone wiring or connect/disconnect
ISDN equipment during an electrical storm.
4.
You may now connect your telephone equipment to the AUX
port(s) or, you may choose to do this after the unit has been
configured. Use the cables provided with your telephone
equipment to connect to AUX 1 or AUX 2.
5
. Connect the power supply to the AC outlet to power up the
unit.
INST
ALLA
TION
CAUTION: Telecommunications voltages and currents can exceed the limits of
safety extra low voltage (SELV), resulting in personal injury. Do not touch any
components on the modem’s printed circuit board when power is applied, or the
telephone cable is plugged in.
Avoid installing, handling the telephone cable, or changing the jumper settings
on the modem during any weather activity where lightning strikes may occur.
This unit is intended for installation in computing devices that are non-
operator accessible. Installation is to be performed by qualified service
personnel only.
