bObsweep WP260011, Owner'S Manual, Page: 13 / 98

13
After installing Bob’s side brush, you must set him to charge.
To charge Bob:
Charge Bob
1 2
Plug the charging adapter into the side
of the charging station.
Place Bob on his charging station with
the metal plates on his underside sit-
ting on top of the nodes on his station.
If Bob can’t find his
charging station on
his own, the station
needs to be synced
( see page 24 ).
The charging station will save its last settings for up to 8 hours
after being disconnected or turned off.