bObsweep bObi Pet 2015, Owner'S Manual

Page: 21 / 66

bObi blOck will automatically go into standby after 3 hours of use and must be
turned on each time it is needed.
When the light flashes more quickly than usual, it indicates that the batteries are
low and need to be replaced soon.
Turning the blOck OFF
1. While blOck is ON, press the ON/OFF button. The power light inside blOck
turns OFF, indicating that the blOck is now fully off.
2. Each time you switch the blOck to ON, it stays on for 3 hours. To preserve
battery life, keep blOck OFF when you are not using it.
Syncing bObi and her blOck
If bObi doesn’t respond to her blOck, the blOck and bObi are out of sync. To
synchronize their coding, follow these steps:
1. Switch both bObi and blOck to OFF.
2. Press the ON/OFF button on the back of blOck so that blOck is ON while
bObi stays OFF.
3. The power light inside blOck turns ON, stays ON for 10 seconds, and then
blinks every 3 secs. This indicates that blOck is ON and ready to sync!
4. Press the sync button on the back of blOck and hold it down while switching
bObi ON.
5. bObi will make two consecutive beeps. The sync is a success!
6. bObi blOck is now ready to be used.