bObsweep bObi Pet 2015, Owner'S Manual, Page: 17 / 66

bObi can accidentally run over her adapter cord and get it tangled in her brush. Help
bObi avoid this by hiding the cord behind her station and securing it between the
charging station and the wall.
Syncing bObi with her charging station
If bObi can’t find her charging station, the station and bObi are out of sync. To
synchronize their coding, follow these steps:
1. Bring bObi close to her charging station.
2. Disconnect the charging station from the adapter.
3. Set the power switch on bObi’s side to OFF.
4. Plug the adapter into the charging station.
5. Use the syncing tool to press and hold the sync button on the back of the
charging station.
6. While holding down the sync button, set bObi’s power switch to ON.
7. bObi will emit a series of chirps to indicate her charging station has been
synchronized.
8. If bObi remains silent, turn bObi and her charging station OFF, disconnect the
station from the adapter, and wait a few minutes before repeating the process
(restart from step 1).