Quick Start
Cleaning
Schedule
Auto-Resume Mode
Enabling Auto-Resume
Auto-Resume Mode
On auto-resume mode, Bob leaves his charging station after every recharge to perform “back-to-back”
cleaning cycles. To enable auto-resume, make sure Bob is turned ON and synced to his FullCommand™
remote.
1.
Press the SET CLEANING SCHEDULE
button on the remote.
2.
Press the STOP button and “bbgo” (back-to-
back go) will appear on the remote’s screen.
3.
Press the SET CLEANING SCHEDULE
button again to save your settings.
2.
Press the STOP button and “bbgo” will
reset to the last saved time.
Parts You’ll Need:
FullCommand™
AAA Batteries x2
Remote
(not included)
1.
Press the SET CLEANING SCHEDULE
button on the remote.
3.
Press the SET CLEANING SCHEDULE
button again to save your settings.
Disabling Auto-Resume
48
47