BOB’S SPACE RACERS®
BIG DOG (KIDDIE DOG POUNDER)™ ARCADE
4
1. SPECIFICATIONS
IMPORTANT SETUP INFORMATION
CENTER LEVELER ADJUSTMENT
– The center foot
leveler adjustment is critical to the proper operation of the
game. The purpose of this adjuster is to control cabinet
vibration to prevent damage to electronic and other
components in the game. When the adjuster is properly
contacting the floor, any force from pressing down the bone
that is transmitted through the pivot mechanism will be
transmitted directly to the floor and NOT the bottom of the
cabinet. It is important to make sure the weight of the game
is equally distributed across all 5 legs to avoid rocking and
damage.
To ensure the proper operation and longevity of your game, make sure that the center leveler located directly under
the pivot mechanism is FULLY extended to the floor. If not, turn the adjusting nut until the leveler is making FULL
contact as shown in the illustration.
DOOR OPERATION
– It is important for the cabinet of the game to be squared up for the front door to open and close
smoothly. The squareness of the cabinet is adjusted at the factory; however the floor may not be level where you are
installing the game. Check that the space across the top edge of the door is even all the way across the front as
shown in the illustration. If it is not, there is threaded adjustment rod inside the game to ensure that the game is
square. Loosen and adjust the lower nut set in or out until the cabinet door operates smoothly and the space across
the top is even.
ADJUSTMENT
ROD
FRONT DOOR
(TOP EDGE)
CENTER
LEVELER
Summary of Contents for Big Dog Kiddie Dog Pounder
