background image

BOB’S SPACE RACERS® 

 

 

 

 

 

      BIG DOG (KIDDIE DOG POUNDER)™ ARCADE 

 

12

Symptom Possible 

Problem 

Solution 

 

Power Power 

Sound Problems 

   -No sound 
   -Low Sound 
   -Intermittent Sound

 

Low Volume 

Check Volume Control and adjust as necessary 

Faulty speaker harnessing 

Check connections and/or repair harnessing 

Faulty speaker 

Check and/or replace speaker 

Faulty sound board or sound board harnessing 

Check connections or Replace Sound Board 

Faulty Main P.C. Board 

Check and/or repair or replace Main P.C. Board 

 

Game does not take or add 
money correctly 

Coin switch out of adjustment 

Re-bend coin switch wire 

Coin mech dirty or improperly adjusted 

Clean and adjust mech as necessary 

Faulty Coin switch 

Check and/or replace switch 

Faulty coin switch harness or connector 

Check and/or repair harnessing 

Improperly programmed electronic mech 

Reprogram or replace electronic mech 

Game improperly programmed 

Check programming options and adjust 

Faulty Front Panel Board 

Repair and/or replace Front Panel Board 

Faulty Main P.C. Board or component 

Repair and/or replace Main P.C. board 

 
Ticket Dispenser not working 
properly, or no tickets being 
dispensed 

No tickets in the game 

Refill ticket dispenser and press the reset button 

Tickets jammed in dispenser 

Clear ticket jam 

Ticket dispenser sensor blocked with debris 

Clean off sensor 

Poor connection on the ticket dispenser 

Check and/or replace- connectors 

Game improperly programmed 

Check ticket programming options 

Faulty ticket dispenser 

Replace dispenser 

Faulty ticket dispenser harnessing 

Check and/or repair harnessing 

Repair and/or replace Front Panel Board 

Faulty Front Panel Board 

Faulty Main P.C. Board 

Replace or repair Main P.C. Board 

 
Game will not start 

Game power off 

Check on/off switch and power cord  

Main fuse blown 

Check and/or replace fuse as necessary 

Ground wire broken or loose 

Replace or tighten faulty ground wire

Power Supply problem or failure 

Check Power Supply output and connections 

Faulty P.C. board or component 

Repair and/or replace main P.C. board 

 
Game stops or is stopped 
with nothing displayed 

The power connector is disconnected. 

Reconnect the connector securely. 

Possible faulty connection or short circuit. 

Check all circuitry for faulty connections or short 
circuits. 

 

Game resets when hit 

Ground wire broken or loose 

Replace or tighten faulty ground wire

 

Check AC plug in at power supply

Insert A.C .power plug into power supply and secure

 

Balls will not launch into the air  Hand Program option set wrong 

Set or reset Hand Program option to 1 

Ground wire broken or loose

Replace or tighten faulty ground wire

Low or no air pressure

Check air supply to game (90 PSI)

 

Ball hammock broken

 

Replace ball hammock

 

Faulty valve harness or solid state relay

Check valve harness and solid state relay

Faulty main P.C. board

Replace P.C. board

 

 

Dog Bone must be hit very 
hard to launch balls 

Hand Program option set wrong 

Set or reset Hand Program option to 1 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for Big Dog Kiddie Dog Pounder






































Reviews: