Form No. 700-69 Multi Language (Rev. 7/1/13) © 2013 Bobrick Washroom Equipment, Inc.
Printed in U.S.A.
Warranty
IMPORTANT
LIMITED WARRANTY
SAVE
Installation Date: ______________________________________________________________________________________________
Serial No(s).: _________________________________________________________________________________________________
Installation Address:
___________________________________________________________________________________________
Telephone No.: ________________________________________________________________________________________________
The Bobrick Dryer of the serial number(s) indicated herein, and all parts (except motor brushes) are warranted to the original owner of the
installed unit for B-700, B-708 ten years; B-770, B-778 five years from date of original purchase for AutoPilot No-Touch hand dryers, against
defects in factory workmanship or material under normal use and service.*
*Motor brushes shall be warranted for three years from date of purchase. This warranty is limited to repair or exchange of defective parts at the
option of Bobrick Washroom Equipment, Inc.
THIS WARRANTY DOES NOT COVER ACCIDENTAL DAMAGE, IMPROPER HANDLING OR INSTALLATION, OR REPAIRS MADE
BY UNAUTHORIZED PERSONS, AND SPECIFICALLY EXCLUDES CLAIMS FOR INDIRECT, ACCIDENTAL OR CONSEQUENTIAL
DAMAGES TO PROPERTY. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
LIMITED TO THE SAME DURATION OF THE ABOVE WARRANTY.
Some states do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary from state to state.
*
Normal service constitutes performing the following preventive maintenance procedures at six-month intervals.
A. Remove cover and clean any lint, dust or grease from air-intake grille and baffle from behind air-outlet nozzle.
B. Visually inspect motor brushes to insure remaining brush length is a minimum of 1/2 inch (12.7mm).
Labor costs for preventive maintenance shall be at owner's expense.
For repair or exchange of defective part, send the part, together with installation date and serial number, to B OBR IC K .
4