background image

13

07

. INSTRUCTIONS FOR USE

 •  Insure that carrying the child will not interfere with the rear 

brakes. These safety issues should be revised as your child 
grows.

•  Dress the child in proper clothes according to weather condi-

tions. Carried children need to be more warmly dressed than 
riders of cycles and should be protected from rain, and from 
temperatures below freezing that could cause the child to suf-
fer frostbite. Always insure that none of your child’s clothing or 
shoes can become entangle with any part of the bicycle.

•  You must cover any sharp or pointy objects, “pinch points” or 

body part entrapment areas on the bicycle that could be 
reached by the child.

•  The carrier and cushion can get hot if under the sun for a long 

time. Make sure that they are not too hot before carrying the 
child.

•  Check if all parts of the bicycle function correctly with the 

carrier mounted.

•  The bicycle to which the carrier is attached must be in good 

working order, of a type appropriate for the additional load, 
and of proper size and adjustment for the rider. Check the bicy-
cle user manual or the bicycle manufacturer to obtain informa-
tion and to make sure the bicycle model is appropriate to carry 
a bicycle carrier according to these characteristics.

•  Do not use the carrier if any part is broken or damaged. Check 

all components regularly and replace any when required. 
Check the maintenance chapter.

•  The rider and the child should wear helmets that have been 

approved to nationally recognized standards.

08

. CARE AND MAINTAINANCE

To keep the carrier in good working condition and to prevent accidents we recommend the following

:

• Check regularly the mounting system of the carrier to the bicycle in order to make sure it is in perfect condition.

•  Before any ride, check all the components to see if they work properly. Do not use the carrier if any of the components are 

damaged. Damaged components must be replaced. In order to replace them, you need to contact your local dealer in order to 
get the correct components for replacement. You can find all the contacts on the website: 

http://bit.ly/bobike-usa

•  If you have suffered an accident with your bicycle and carrier, we advise you to get a new carrier. Even if there is no visible 

damage to the carrier.

• Clean the carrier with soap and water (do not use abrasive, corrosive or toxic products). Leave it to dry at room temperature.

•  Failure to comply with these operating instructions can lead 

to serious injury or death of the bicycle operator and/or child. 
Polisport is not liable for any damage to the product or per-
sons resulting from improper installation, storage, or assem-
bly (non-compliance with assembly instructions), improper 
maintenance, misuse or use not in compliance with the tech-
nical or use specifications (non-compliance with mainte-
nance and care instructions), modifications or repairs made 
by you or a third party.

•  When the steering angle to each side is reduced to less than 

45º, change the type of handlebar.

WARNING

: Additional security devices shall always be fas-

tened.

WARNING

: Do not place any additional luggage on the seat, 

because the weight cannot exceed 15 kg (33 lb). If you carry 
extra luggage, the bicycle’s carrying capacity must not be ex-
ceeded, and we recommend that it be placed at the rear of the 
bike.

WARNING

: The turning circle will be restricted when using a 

front child seat. Pay attention to this fact before setting off.

WARNING

: Remove the seat when transporting the bicycle by 

car (outside the car). Air turbulence might damage the seat or 
loosen its fastenings or other suspended elements, which 
could lead to an accident.

EN

Summary of Contents for One mini









































Reviews: