bObi Classic SW603001, Owner'S Manual, Page: 45 / 49

88 89
10. bObi is getting stuck under some of my furniture or traveling into areas
with wires that tangle up the brush. How can I stop her from going into
these areas?
If bObi maneuvers under a piece of furniture and there is only one open
entrance, she may need a few minutes to figure out how to escape on
her own. You will not need to assist her when this happens, unless bObi
stops cleaning completely and starts beeping.
If you would like bObi to avoid a certain area, such as an area with wires, you
may use blOck (available for purchase separately) to create a digital barrier.
11. Why does bObi start cleaning even though I did not tell her to clean?
bObi will start up on her own when she is 1) scheduled to clean, or 2) when
she is on auto-resume mode.
First, make sure the “Current time and day” is set correctly on bObi’s
remote. Remember, bObi works on a 24-hour clock. If the current time
and date is incorrect, then bObi’s cleaning schedule will be out of sync.
Consult the Scheduling section of this manual (page 36) for detailed
instruction on how to set bObi’s cleaning schedule.
When bObi is on auto-resume mode, she displays “FFGO” on her remote,
below “Scheduled Cleaning.” On auto-resume, bObi automatically begins
cleaning after she has fully charged. To disable auto-resume, press the SET
CLEANING SCHEDULE button on bObi’s remote. Then press STOP.
“FFGO” will reset to the last time saved. Press SET CLEANING SCHEDULE
again to save your settings.
6. My bObi won’t turn on no matter what I do.
If bObi does not start after flipping her power switch ON, her battery has
likely drained too low to operate. To recharge, place her on her charging
station with the metal nodes on her front resting against the plates on her
station. Alternatively, you can unplug the adapter from the charging station
and plug it directly into the inlet above bObi’s power switch. When bObi is
charging, the center light on her cover will blink. Let bObi recharge fully
before using again.
7. Why is my bObi beeping?
bObi beeps when she encounters problems cleaning and needs assistance.
In addition to beeping, she will display an Error Code (Er) on her remote, which
lets you know why she has stopped (see page 67).
8. bObi is having trouble finding her charging station. Where is the best
place to put the station?
bObi will find her station more easily if you place it in a central location
with plenty of space around it, so that she may detect it from afar. To facilitate
bObi’s docking, place the charging station against a wall on a flat surface (like
hardwood or tile flooring) instead of carpet. To increase bObi’s chance of
finding her station, place the station in a spot where bObi has a higher chance
of passing through.
9. I am having problems removing bObi’s brushes.
If the main or side brushes are difficult to remove, it is likely because hair,
string, or other debris have been caught in them and are clogging the areas
where they attach to bObi. You can use scissors to cut the hair wrapped
around either brush, until you are able to remove it.