bObi Classic SW603001, Owner'S Manual, Page: 17 / 49

32 33
bObi’s remote control requires two AAA batteries (not included). Do not leave
the batteries in the remote if you are not using it on a regular basis. Keep the
remote at room temperature. If bObi is not responding to her remote, it likely
needs to be synced.
To sync bObi’s remote:
Using the navigational arrows:
Hold down the remote’s navigational buttons to keep bObi moving in the desired
direction. Release the button when you are done manually driving bObi.
bObi’s edge sensors are located along her front, not along her back. Do not
reverse bObi towards edges, as she will fall.
Syncing bObi with her Remote
Flip bObi’s power switch
OFF.
While holding down the
OK button on bObi’s re-
mote, flip bObi’s power
switch ON.
bObi will chirp twice to let
you know the sync was
successful.
1 2 3
If bObi does not chirp, repeat the process.