BOB-HOME ESPRESSO CLUB CM5700T-GS, Manual

Page: 23 / 28

C L E A N I N G A N D M A I N T E N A N C E
1. Cut off power source and let the coffee maker cool down completely before cleaning.
2. Clean housing of coffee maker with moisture-proof sponge often and clean water tank, drip tray
and removable shelf regularly then dry them.
3. Do not clean with alcohol or solvent cleanser. Never immerse the housing in water for cleaning.
4. Detach the metal filter holder by turning it clockwise, get rid of coffee residue inside, then you
can clean it with cleanser, but at last you must rinse with clear water. Do not wash the metal filter
holder in a dishwasher.
5. Clean the appliance after every use in order to make it work properly.
CLEANING MINERAL DEPOSITS
To keep the device operating efficiently and to avoid any bad taste in your coffee you have to clean
and descale the device regulary. If the total working cycle of the machine reaches 1000 cycles, there
will be a reminder signal once the machine is turned on ( four indicators on the panel will flash red
twice), which reminds user to perform descaling.
1. Fill the water tank with water and descaler to the MAX level in the gauge of coffee maker. Pls do
only use household descaled and follow the instructions from descale supplier.
2. Press the power button, the unit enters preheating, after finish preheating, the indicator becomes
solid on
3. Make sure the portafilter is in place and locked.
4. Place a large enough container (approx. 2L) to receive water under the filter holder outlet, hot
water pipe nozzle and steam nozzle
5. Press and hold the Hot water button for 5s, the machine will enter the automatic cleaning
function, then turn the steam knob to the Max position. During the automatic cleaning process,
the descaler solution will flow out from the filter holder, hot water pipe and steam pipe
respectively, after 10-15 minutes, the cleaning function is completed, the machine enters the
power-off state.
6. After removing scale, fill clear water into water tank, repeat step 4 until descaler solution is
cleaned up.
7. After cleaning, clean water tank and drip tray.
Note:
1) During automatic cleaning process, a suitable container (about 2L) shall be placed at the filter
holder outlet and hot water outlet to receive water.
2) During cleaning , the pump will start and stop intermittently. This is a normal phenomenon.
GB