BOB-HOME ESPRESSO CLUB CM5700T-GS, Manual

Page: 22 / 28

Operating
1. Fill appropriate water into water tank, water level can’t exceed MAX.
2. Connect the machine into power source, press the Power button (steam knob needs to be turned
off), the machine starts to preheat, the indicator flashes until the machine finishes preheating, the
power indicator becomes always on, and it enters the standby state.
3. Make hot water : Press Hot water button, the Hot water button indicator flashes in the form of a
breathing light; hot water flows out from hot water pipe, after dispensing 200ml hot water, the
machine automatically stops and returns to standby mode. To stop the hot water function anytime,
press the Hot water button again.
4. Brew single cup of coffee : Attach 1- cup filter to the filter holder, load 13-15 grams of coffee
powder into filter using a tamper and press the coffee powder with a force of 10-15Kg, then align
the filter holder assembly with the filter holder bracket buckle position and turn it
counterclockwise into the filter holder bracket, put a coffee cup on the drip plate under the filter
holder. Press the Single cup button in the standby state, the Single cup button indicator flashes in
the form of a breathing light; the machine starts to brew coffee, and the pressure gauge will
display pressure parameters in brewing process, when the coffee is finished, the pressure gauge
is reset, all indicators on the panel are solid on, and machine restores to the standby mode.
5. Brew double cup of coffee: Attach 2- cup filter to the filter holder, load 20-22 grams of coffee
powder into filter using a tamper and press the coffee powder with a force of 10-15Kg, then align
the filter holder assembly with the filter holder bracket buckle position and turn it
counterclockwise into the filter holder bracket, put a coffee cup on the drip plate under the filter
holder. Press the Double cup button in the standby state, the Double cup button indicator flashes
in the form of a breathing light; the machine starts to brew coffee, and the pressure gauge will
display pressure parameters in brewing process, when the coffee is finished, the pressure gauge
is reset, all indicators on the panel are solid on, and machine restores to the standby mode.
6. Produce steam to froth milk : Turn steam knob from off to preheat position, at this time the
machine starts steam preheating, steam indicator flashes, when reaching steam preheating
temperature, indicator keeps constant on, turn steam knob from preheat to Max position, the
machine starts to produce steam, steam indicator flashes in the form of a breathing light during
producing steam; To stop steam function, turn steam knob from MAX to preheat position to stop
producing steam. Turn steam knob from preheat to off position, the steam indicator light is
extinguished, the machine will cool down, when all indicators on the panel become constant on,
the machine enters the standby mode.
Recommendation: The machine shall need 1 minute rest after performing steam
function for continuous 10 minutes, so as to prevent the machine from overheating.
7. Cup volume adjustment: Press and hold Single cup button and Double cup button at the same
time, the machine enters customized cup volume status (single indicator and double indicator
flash at the same time), press single button at this time (single indicator flashes, double indicator
illuminates) to memorize single cup volume while start to dispense hot water, press Single cup
button again (single indicator illuminates) to stop dispensing water and finish memorizing. After
the memorization is completed, the machine resumes customized cup volume status; Set double
cup volume in same method as above.