Bo-Lang FIT-AOXIN-E8-AB2E, User Manual

Page: 22 / 23

- 22 -
Finally:
1
、
Please tighten all bolts and nuts firmly by spanner, not by hand.
2
、
Now the whole machine has been assembled completely.
3
、
Make sure to check all pulleys and cables before using your machine.
4
、
Please adjust cables according to actual situation at the beginning.
Daily Care & Maintenance
Maintenance
:
Your home gym is designed to be reliable and easy to use. In order to extend the service
life of the machine, its components must be lubricated on time. Lubrication has been done
before the machine leaving factory, but after a certain period of usage, lubrication and
maintenance must be carried on especially on the weight plate guide rods.
Note: It is forbidden to use machinery oil and grease, otherwise after days of exposure, a
n oil can turn in to more of a honing compound than a lubricating medium caused by tiny
dust particles from the air.
Sewing machine oil is recommended.
1
、
Cables are wearable items. It is your responsibility to prevent unexpected breakage.
Cable inspection should be performed daily. Inspect all cables and pulleys, and the
area near the fitting at each end of each cable. Replace any damaged or worn cable
immediately. Do not allow the machine to be used until these are replaced.
2
、
Please check or adjust cables tension regularly.
3
、
All parts and functions should be checked regularly to ensure correct operation.
4
、
If you experience problems, first recheck the assembly instructions to locate any
possible errors made during assembly. If you are unable to correct the problem, please
contact our after-sales service for support.
5
、
If any worn or unexpected breakage, please stop using machine immediately and
contact our after-sales service for support.
6
、
During inspection, please make sure all bolts and nuts are tightened firmly.
7
、
Remember to check and make sure all welds are crack-free.
8
、
Failure daily care and maintenance may lead to injury on people or equipment damage.