9
9. Appendix
Appendix A: Enclosure
Standard Accessories:
Passive probe: 1.2 m, 1:1 (10:1) (2 for dual-channel, 4 for four-channel)
1x CD (Supplied Software)
1x USB cable
1x Quick Guide
1x AC-DC adapter (only for the model with LAN port)
Options:
1x Soft case
Appendix B: General Care and Cleaning
General Care
To avoid any damage to the instrument or probe, do not expose it to any
sprays, liquids, or solvents.
Cleaning
Inspect the instrument and probes as often as operating conditions require.
To clean the instrument exterior, perform the following steps:
1. Wipe the dust from the instrument and probe surface with a soft cloth.
2. Disconnect the USB cable before cleaning your Oscilloscope. Clean the
instrument with a soft wet cloth, not dripping water. It is recommended to
scrub with soft detergent or fresh water. To avoid damage to the
instrument or probe, do not use any corrosive chemical cleaning agent.
Warning:
Before power on again for operation, it is required to confirm
that the instrument has already been dried completely,
avoiding any electrical short circuit or bodily injury resulting
form the moisture.
2017.11 V1.2.7
Berkeley Nucleonics Corporation
[email protected] | www.berkeleynucleonics.com
2955 Kerner Blvd, San Rafael, CA 94901 | 800-234-7858