| 5 |
BN Products-USA
www.bnproducts.com
CONTROL FUNCTIONS
Oil Warning Light (Red)
When the oil level falls below the minimum requirements, the oil warning light
comes on and the engine will stop automatically. Unless you refill with oil, the
engine will not start again.
Tip: If the engine stalls or does not start, turn the engine switch to “ON” and
then pull the recoil starter.
If the oil warning light flickers for a few seconds, the engine oil is too low to
protect the engine.
Add oil and restart.
Overload indicator light (Red)
The overload indicator light comes on when an overload of a connected elec-
trical device is detected, the inverter control unit overheats, or the AC output
voltage rises. Then, the AC protector will trip, stopping power generation to
protect the generator and any connected electric devices. The AC pilot light
(Green) will go off, and the overload indicator light (Red) will stay on, but the
engine will not stop running.
When the overload indicator light comes on, and power generation stops,
proceed as follows:
• Turn off any connected electric devices and stop the engine.
• Reduce the total wattage of connected electric appliances within the
rated output.
