BMW Z8 2000, Owner'S Manual

Page: 129 / 172

128 n
The onboard tool kit is located under
the luggage compartment's floor panel.
520de059
1 To move the wipers to the fold-out
position:
Turn the ignition on. Set the wiper
lever in position 1 (intermittent set-
ting). Turn the ignition back off during
the wiper-delay pause. The wipers
will then be in a rather vertical position
2 Rotate the wiper arm completely out
from the windshield
3 Position the wiper blade at an angle
and pull the release spring (arrow)
4 Fold the wiper blade down and
unhook it toward the windshield
5 Pull the wiper blade past the wiper
arm toward the top
6 Insert a new wiper blade and press it
in until you hear it click into place.
520de060
Fold the wipers back onto the
windshield before turning the igni-
tion key to position 1 or 2. If you do not,
the wipers could be damaged.
<
Use only wiper blades approved
by BMW.
<
Onboard tool kit Windshield wiper blades
Online Edition for Part No. 01 41 0 155 083 - © 03/00 BMW AG