BMW Z3 COUPE 2002 Owner'S Manual Download Page 21

Page: 21 / 187

Index

Data

chnolog

Repairs

Maintenanc

Controls

Overview

Indicator and warning lamps

Red and yellow: continue to drive
cautiously

The red warning lamp for the
brake hydraulic system comes
on together with the yellow indi-
cator lamps for ABS, ASC+T/
DSC

The entire ABS, CBC, ASC+T/
DSC

and

ADB/DBC

control

system has failed. Continue
driving cautiously and defen-

sively. Avoid hard brake applications.
Have the system checked by your BMW
center as soon as possible.
For additional information, refer to
pages

and

102

Warning lamps for Canadian
models.

Red: an important reminder

Parking brake
Comes on when the parking
brake is engaged.

For additional information, refer to
page

Parking brake warning lamp for
Canadian models.

Please fasten your safety belt

●

Together with an acoustic signal.
Comes on until the safety belts

are fastened.
For additional information on safety
belts, refer to page

Airbags

●

Please have the system
inspected by your BMW center.

For additional information, refer to
pages

and

164

Yellow: check as soon as possible

Antilock Brake System (ABS)

●

Comes on during normal vehicle
operation: ABS has been deac-

tivated in response to system malfunc-
tion. Conventional braking efficiency
is available without limitations. Please
have the system inspected by your
BMW center.
For additional information, refer to
page

101

Antilock Brake System warning
lamp for Canadian models.

Engine oil level
Comes on while driving: the
oil level is at the absolute

minimum; refill as soon as possible. Do
not drive more than approx. 30 miles
(50 km) until you do.
For additional information, refer to
page

123

Engine oil level
Comes on after the engine has
been switched off: add engine

oil at your earliest opportunity (when
you stop to refuel).
For additional information, refer to
page

123

Summary of Contents for Z3 COUPE 2002




























































































































































































Search results

Summary of Contents for Z3 COUPE 2002

Reviews:

Related manuals for Z3 COUPE 2002

Brands by name

Popular brands

BMW Z3 COUPE 2002, Owner'S Manual

Search results

Summary of Contents for Z3 COUPE 2002

Reviews:

Related manuals for Z3 COUPE 2002

Brands by name

Popular brands