BMW Z3 COUPE 2002, Owner'S Manual

Page: 71 / 187

71 n
Index
Data
Te
chnolog
y
Repairs
Maintenanc
e
Controls
Overview
Computer
*
To enter the time
Enter the numbers for hours and
minutes by pressing the
button.
Enter the hour first. Each time the
button is pressed, the hour display
increases by one. Pressing and holding
the button starts the rapid advance.
Confirm the time set with the
button. Now enter the minutes when
two zeros appear.
Enter the minutes in the same manner
as the hours.
Press the save button : the time is
started exactly on the second. The
colon stops flashing.
To reset the time
Press and hold the button for
approx. 3 seconds: enter the hour when
the colon begins to flash.
Enter the numbers by pressing the
button in the same manner as when
entering the time.
Setting the 12-hour or 24-hour
mode
Press and hold the buttons
simultaneously for approx. 1 second.
Then press the button. Now, the
mode changes from 12 to 24 hours
whenever you press the
button.
When you select the 12-hour mode,
AM or PM will appear on the right-hand
side of the display panel.
The last mode selected is adopted
when you press
or automatically
stored approx. 5 seconds after the last
setting.
Outside temperature
If the outside temperature drops to
approx. +37.5
7
(+3
6
), a warning
signal sounds (ice warning). The
temperature display appears automati-
cally and flashes for 8 seconds.
The warning is repeated whenever the
temperature has reached at least
+43
7
(+6
6
) and then drops to
+37.5
7
(+3
6
) again.
The ice warning does not alter the
fact that surface ice can form at
temperatures above +37.5
7
(+3
6
),
on bridges or shaded road surfaces, for
instance.
<
367us712