background image

Press the button.
The menu for the Intelligent Safety sys‐

tem is displayed.
If all Intelligent Safety systems were switched off,
all systems are now switched on.
"Configure INDIVIDUAL": depending on the
equipment version, the Intelligent Safety sys‐
tems can be individually configured. The individ‐
ual settings are activated and stored. As soon as
a setting is changed on the menu, all settings of
the menu are activated.

Press the button repeatedly. The follow‐
ing settings are switched between:

"ALL ON": all Intelligent Safety systems are
switched on. Basic settings are activated for the
sub-functions, for instance setting for warning
time.
"INDIVIDUAL": the Intelligent Safety systems are
switched on according to the individual settings.
Some Intelligent Safety systems cannot be indi‐
vidually switched off.

Press and hold this button.
All Intelligent Safety systems are

switched off.

Approach control warning

with light braking function

Principle

The Forward Collision Warning warns of a possi‐
ble risk of collision and may brake independently.
In the event of an accident, the system may re‐
duce impact speed.

General information

Sensors detect the traffic situation.
The system issues a two-phase warning of a
possible risk of collision with vehicles at speeds

above approx. 3 mph/5 km/h. The timing of warn‐
ings may vary with the current driving situation.
When the vehicle is driven so that it is intention‐
ally approaching another vehicle, the Forward
Collision Warning and brake intervention are de‐
layed in order to avoid false system reactions.
Depending on the vehicle equipment, the Driver
Attention Camera in the instrument cluster cap‐
tures the driver’s field of vision. Additionally, the
system checks for visual impairments. Field of vi‐
sion and visibility also affect the timing of the
warnings.

Safety information

Warning

The system cannot serve as a substitute for the
driver’s personal judgment in assessing visibility
and traffic situation. There is a risk of accident.
Adjust driving style to traffic conditions. Watch
traffic closely and actively intervene where ap‐
propriate.

Warning

Indicators and warnings cannot serve as a sub‐
stitute for the driver’s personal judgment. Due
to its limits, the system may not issue warnings
or reactions, or these may be issued late or in a
manner that is not consistent with their normal
use. There is a risk of accident. Adjust driving
style to traffic conditions. Watch traffic closely
and actively intervene where appropriate.

Warning

Due to system limits, individual functions can
malfunction during tow-starting/towing with the
Intelligent Safety systems activated. There is a
risk of accident. Switch all Intelligent Safety
systems off prior to tow-starting/towing.

Seite 184

CONTROLS

Safety

184

Online Edition for Part no. 01405A38F56 - VI/21

Summary of Contents for X6 M50i 2021

















































































































































































































































































































































































































Reviews: