BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 63

Page: 63 / 444

BMW Remote Software Upgrade

Vehicle features and options

This chapter describes all standard, country-

specific and optional features offered with the

series. It also describes features and functions

that are not necessarily available in your vehi-

cle, e.g., due to the selected options or coun-

try versions. This also applies to safety-re-

lated functions and systems. When using these

functions and systems, the applicable laws

and regulations must be observed.

BMW Remote Software

Upgrade

Principle

Remote Software Upgrade can be used to up-

date the entire software of the vehicle. This

makes new functions, functional enhance-

ments or quality improvements available.

General information

BMW recommends performing the Remote

Software Upgrade as soon as it becomes

available.

Safety information

Warning

Unattended children or animals in the vehicle

can cause the vehicle to move and endanger

themselves and traffic, for instance due to the

following actions:

▷ Pressing the Start/Stop button.
▷ Releasing the parking brake.
▷ Opening and closing the doors or win-

dows.

▷ Engaging selector lever position N.
▷ Using vehicle equipment.

There is a risk of accidents or injuries. Do not

leave children or animals unattended in the

vehicle. Take the vehicle key with you when

exiting and lock the vehicle.

Functional requirement

▷

Active ConnectedDrive contract.

▷

The integrated SIM card in the vehicle has

been activated.

▷

Cellular network reception.

▷

Consent to transmit the corresponding data

was given in the Data Protection menu.
Additional information:
Data protection, refer to page

Search for an upgrade

Functional requirement

Standby must be turned on to search for a

software upgrade.

Automatic search

The vehicle regularly searches for updates in

the background.

Manual search

"CAR"

"Settings"

"General settings"

"Remote Software Upgrade"

"Search for upgrades"

Follow the instructions on the Control Dis-

play.

Seite 63

BMW Remote Software Upgrade

CONTROLS

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands