WARNING
An unsecured vehicle can put itself into
motion and roll away. There is risk of an acci‐
dent. Before exiting, secure the vehicle against
rolling.
In order to ensure that the vehicle is secured
against rolling away, observe the following:
▷
Set the parking brake.
▷
On uphill grades or on a slope, turn the
front wheels in the direction of the curb.
▷
On uphill grades or on a slope, also secure
the vehicle, e.g. with a wheel chock.◀
Before driving into a car wash
So that the vehicle can roll into a car wash ob‐
serve instructions for going into an automatic
car wash, refer to page
254
.
Steptronic transmission
Switching off the engine
1.
Engage selector lever position P with the
vehicle stopped.
2.
Press the Start/Stop button.
The engine is switched off.
The radio-ready state is switched on.
3.
Set the parking brake.
Auto Start/Stop function
The concept
The Auto Start/Stop function helps save fuel.
The system switches off the engine during a
stop, e.g., in traffic congestion or at traffic
lights. The ignition remains switched on. The
engine starts again automatically for driving
off.
Automatic mode
After every start of the engine using the Start/
Stop button, the Auto Start/Stop function is in
the last selected state, refer to page
72
.
When the Auto Start/Stop function is active, it
is available when the vehicle is traveling faster
than about 3 mph, approx. 5 km/h.
Engine stop
The engine is switched off automatically dur‐
ing a stop under the following conditions:
Steptronic transmission:
▷
The selector lever is in selector lever posi‐
tion D.
▷
The brake pedal remains pressed while the
vehicle is stationary or the vehicle is held
by Automatic Hold.
▷
The driver's safety belt is buckled or the
driver's door is closed.
The air flow from the air conditioner is reduced
when the engine is switched off.
Displays in the instrument cluster
The display indicates that the
Auto Start/Stop function is
ready for an Automatic engine
start.
The display indicates that the
conditions for an automatic en‐
gine stop have not been met.
Functional limitations
The engine is not switched off automatically in
the following situations:
▷
External temperature too low.
▷
The external temperature is high and auto‐
matic climate control is running.
▷
The car's interior has not yet been heated
or cooled to the required level.
▷
The engine is not yet at operating temper‐
ature.
▷
The wheels are at a sharp angle or the
steering wheel is being turned.
Seite 71
Driving
Controls
71
Online Edition for Part no. 01 40 2 963 410 - VI/15
Summary of Contents for X5 2016
