The highest cooling power is active when
two LEDs are lit.
If the cooler was switched on the last time the
ignition was switched on, it will likewise be
switched on the next time the ignition is
switched on.
Switch off
Press button repeatedly until the LEDs go out.
Removing
1.
Pull handles on both sides, arrows.
2.
Fold both release levers up.
3.
Pull cooler downward and remove it.
Installing
1.
Fold the release levers with an angle of ap‐
prox. 45° and push the cooler forward onto
the contact up to the stop.
2.
Fold both release levers down.
3.
Pull handles, arrows 1, and press the re‐
lease levers, arrows 2, into the rails, until
they latch.
Malfunction
The cooler cannot be switched on or switches
off, e.g., when the cooling system overheats or
if the battery voltage is low. One of the LEDs
flashes.
Remedy the problem
1.
If necessary, allow the refrigerator cooling
system to cool down.
2.
Start the engine.
3.
Switch on cooler.
If the LED flashes even after a short time, have
the cooler checked by a dealer’s service center
or another qualified service center or repair
shop.
Seite 180
Controls
Interior equipment
180
Online Edition for Part no. 01 40 2 963 410 - VI/15
Summary of Contents for X5 2016
