manualshive.com logo in svg

BMW X3 xDrive20d 2013, Owner'S Handbook Manual

Share
Download
BMW X3 xDrive20d 2013 Owner'S Handbook Manual Download Page 260

Maintenance

Vehicle Equipment

This chapter describes all standard, national and
special equipment provided in the model series.
Therefore equipment not available in a vehicle is
also described, for example the selected special
equipment or national version. That also applies
to safety-relevant functions and systems.

BMW Maintenance System

The maintenance system points out the neces‐
sary maintenance measures and so supports
you in maintaining the road and operational
safety of the vehicle.

Condition Based Service,

CBS

Sensors and advanced algorithms monitor the
conditions in which your vehicle is used. Condi‐
tion Based Service uses this information to cal‐
culate the maintenance requirements.
The system thus enables adaptation of the
scope of maintenance to the individual usage
profile.
Detailed information on service requirements,
see page 

77

, can be displayed at the control dis‐

play.

Service data in the remote control

Information on maintenance requirements is
continually saved in the remote control. The
Service centre reads out this data and then sug‐
gests a set of maintenance routines optimised
on this basis.
This is why you should hand over the remote
control that was last used for driving to your
service advisor.

Periods out of use

Immobilisation periods with the battery discon‐
nected are not taken into account.
Updating the time-dependent maintenance
scope such a brake fluid and any engine oil and
microfilter or activated carbon filter can be done
by a Service centre.

Service Booklet

Have maintenance work carried out by the Serv‐
ice centre confirmed in the service booklet. The
entries in it serve as proof of regular mainte‐
nance.

For Australia/New Zealand:

Maintenance

No maintenance work other than normal main‐
tenance is required to keep the emission levels
of your vehicle within the design limits.

Overview: maintenance

schedule

Standard schedule

Maintenance work

Examine Check Control messages.

Examine indicator and warning messages.

Seite 260

Mobility

Maintenance

260

Online Edition for Part no. 01 40 2 900 867 - 03 12 490

Summary of Contents for X3 xDrive20d 2013

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands