manualshive.com logo in svg

BMW X3 xDrive20d 2013, Owner'S Handbook Manual

Share
Download
BMW X3 xDrive20d 2013 Owner'S Handbook Manual Download Page 218

Office

Vehicle Equipment

This chapter describes all standard, national and
special equipment provided in the model series.
Therefore equipment not available in a vehicle is
also described, for example the selected special
equipment or national version. That also applies
to safety-relevant functions and systems.

Overview

General

Contacts, appointments, tasks, notes, text mes‐
sages and e-mails from the mobile phone can be
viewed on the control display if the mobile phone
supports these functions and is compatible with
the corresponding Bluetooth standards.
Information on which mobile phones support
which Office functions can be found under
www.bmw.com/bluetooth.
Contents are completely displayed when the
vehicle is at standstill.
The system can only read from the mobile.

Do not operate Office while the vehicle is
in motion.

Only make adjustments if the traffic conditions
are appropriate. Otherwise, you may become
distracted and endanger the vehicle occupants
and other road users.◀

Requirements

▷

A compatible mobile phone is registered
and connected to the vehicle. For some mo‐
bile phones, data access must be confirmed
on the mobile phone.

▷

Time, time zone and date, see page 

83

, are

correctly set on the Control Display and on
the mobile phone, for example to display ap‐
pointments correctly.

▷

Office is activated, see page 

209

.

Updating

The data is updated every time the mobile
phone is connected to the vehicle. Appoint‐
ments, tasks, notes and reminders can be up‐
dated separately.

1.

"Office"

2.

"Office today", "Calendar", "Tasks",
"Notes" or "Reminders"

3.

Call up "Options".

4.

"Update data"
Data from the mobile phone is transferred to
the vehicle again.

Office update

The number of unread messages and active
tasks as well as appointments coming up are
displayed.

1.

"Office"

2.

"Office today"

3.

Select the desired entry to display details.

Contacts

Note

When equipped with mobile phone preparation.

Seite 218

Communication

Office

218

Online Edition for Part no. 01 40 2 900 867 - 03 12 490

Summary of Contents for X3 xDrive20d 2013

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands