BMW X1 2018, Owner'S Manual

Page: 118 / 314

The lever automatically returns to its initial posi‐
tion when released.
Interval mode or rain sensor
Concept
The rain sensor automatically controls the time
between wipes depending on the intensity of the
rainfall.
General information
The sensor is located on the windshield, directly
in front of the interior mirror. Without the rain
sensor, the frequency of the wiper operation is
preset.
Safety information
NOTE
If the rain sensor is activated, the wipers can
accidentally start moving in vehicle washes.
There is a risk of damage to property. Deacti‐
vate the rain sensor in vehicle washes.
Activating/deactivating
Press the button on the wiper lever.
Wiping is started.
If the vehicle is equipped with a rain sensor: the
LED in the wiper lever is illuminated.
If wipers are frozen to windshield, wiper opera‐
tion is deactivated.
During trip interruption with the rain sensor
switched on: if the trip is resumed within approx.
15 minutes, the rain sensor is automatically acti‐
vated again.
Setting the frequency or sensitivity
of the rain sensor
Turn the thumbwheel to adjust the frequency or
sensitivity of the rain sensor.
Up: short interval or high sensitivity of the rain
sensor.
Down: long interval or low sensitivity of the rain
sensor.
Windshield and headlight
washer system
Safety information
WARNING
The washer fluid can freeze onto the window at
low temperatures and obstruct the view. There
is a risk of an accident. Only use the washer
systems, if the washer fluid cannot freeze. Use
antifreeze, if needed.
NOTE
When the washer fluid reservoir is empty, the
wash pump cannot work as intended. There is
a risk of damage to property. Do not use the
washer system when the washer fluid reservoir
is empty.
Seite 118
CONTROLS
Driving
118
Online Edition for Part no. 01402120596 - II/18