Co
mmu
n
ic
a
ti
on
sy
ste
m
2
10
Selecting a function
• Press knob
2
.
» The function-selection mode
is active.
» The LEDs beside the
l
light
up.
• Turn knob
2
until the LED
beside the function you want
to select lights up.
» The current value of the
function appears in
display
1
.
The communication sys-
tem returns to standby
ON if the knob is not moved for
5 seconds.
c
Setting a function
• Press knob
2
.
» The LED beside the function
you selected lights up.
» The 'function set' mode is
active.
• Turn knob
2
until the value
you want appears in
display
1
.
• Press knob
2
.
» The value you selected is
accepted.
» The function-selection mode
is active.
The communication sys-
tem returns to standby
ON if the knob is not moved for
5 seconds. If you do not press
the knob after turning it to a
value of your choice the com-
munication system returns to
standby ON, but note that the
new value is accepted even
though you did not press the
knob.
c
The section entitled "Overview
of functions" (
b
13) lists the
various functions and settings.
Restoring default
settings
• Press knob
1
.
» The function-selection mode
is active.
• Turn knob
1
until the LED
beside
g
lights up.
• Press knob
1
.
» The LED starts flashing.
• Hold knob
1
down for
5 seconds.
10_BC_VOICE_04_g1.book Seite 10 Mittwoch, 28. Juli 2004 11:24 11
All manuals and user guides at all-guides.com