2
9
Co
mmu
n
ic
a
ti
on
sy
ste
m
» Radio output is now audible
in stereo quality on the
speakers integrated into the
helmet.
• Adjust the volume at the
radio (see the operating
instructions for the radio).
.
• Use spiral cable
5
to connect
cable
4
of the passenger's
helmet to rear-helmet
socket
6
.
» Radio output is now audible
in stereo quality on the
speakers integrated into the
helmet.
» The intercom system is active.
You can switch off the ra-
dio loudspeakers on the
motorcycle for music playback
(see the operating instructions
for the radio).
c
Activating helmet
microphones
• Speak into the helmet micro-
phone.
» The microphone switches
itself on automatically.
The music or the radio out-
put is faded out while you
speak. Approximately
4 seconds after conversation
ceases the microphones go
dead and the music fades in
again.
c
The microphones do not
activate themselves unless
the passenger's helmet is con-
nected.
c
If you press the Send
button
OA
while talking,
your conversation is transmitted
if the two-way radio is switched
on, and other parties can listen
in.
c
Using menus
Standby ON
When display
1
of the control
unit shows
On
and the LEDs
are all off, the communication
system's status is standby
ON.
10_BC_VOICE_04_g1.book Seite 9 Mittwoch, 28. Juli 2004 11:24 11
All manuals and user guides at all-guides.com