EN/19
Retrofit / Installation kit No. 82 83 0 136 518
Installation Instructions No. 01 29 0 136 536
Issue date: 10.2001
6.
To install the amplifier and additional wiring harness
(for cars with a battery in the engine compartment) with an on-board monitor radio
0
0
0
0
0
Lay the 1-pin cable on the radio/amplifier adapter
wiring harness
A
along the main wiring harness on
the left-hand side.
0
Driver’s footwell.
Lay the 1-pin red cable on the radio/amplifier
adapter wiring harness
A
, through the opening (40)
into the control module box in the engine
compartment on the left-hand side.
0
Engine compartment at the front left.
Carefully cut open the rubber grommet (40) in the
front.
Lay the 1-pin red cable on the radio/amplifier
adapter wiring harness
A
, through the opening you
have made in the rubber grommet (40) and then
push it through the rubber grommet (41).
Seal the rubber grommet (40) around the
opening you cut using sealing compound.
0
Lay the 1-pin red cable on the radio/amplifier
adapter wiring harness
A
, under the cable guide
(40) from the left to the right-hand side of the car.
Then on the right-hand side of the car push it
through the rubber grommet (41) to the installation
site of the battery.
046 0826 B
A
40
A
046 0754 B
A
40
41
046 0726 B
A
A
40
41
A
046 0727 B