EN/10
Retrofit / Installation kit No. 82 83 0 136 518
Installation Instructions No. 01 29 0 136 536
Issue date: 10.2001
4.
To install the amplifier and additional wiring harness
(for cars with a battery in the engine compartment
0
0
0
0
0
Carefully
cut open the rubber grommet (40) in the
front a little.Carefully push the power cable (41),
red cable, through the opening you have made in
the rubber grommet (40) and then push it through
the rubber grommet (42).
Seal the rubber grommet (40) around the
opening you cut using sealing compound.
0
Lay the power cable (40), red cable, under the
cable guide (41) from the left to the right side of the
car.Then on the right-hand side of the car push it
through the rubber grommet (42) to the installation
site of the battery.
0
Lay the power cable (40), red cable, to the
connection site of the supply cable with fuse
B
and
cut off the excess length.
Crimp the blade terminal contact (11) on to cut off
power cable (40) and connect it to the supply
cable with fuse
B
.Secure the cable eyelet, 8 mm in
diameter (41) on the supply cable with fuse
B
to
the positive pole on the battery.The secure the
supply cable with fuse
B
and the power cable (40)
with cable ties (18).
41
40
42
046 0634 B
40
40
41
42
40
046 0635 B
046 0636 B
40
B
18
41
11