3.2.2
Set the hand gear shift lever or foot gear shift lever to neutral gear position
between gear positions No.1 and No.2 (see Figs 4 and 5). Check to see whether the gear
lever is at neutral positicn by stepping lightly the kickstarter . If the wheels wouldn't
move, the neutral gear position is properly set. If the wheels trend to move forward,
the neutral gear position is not properly set. 'I'hen it should be reset. The engine can
be started only when the neutral gear position is properly set.
3.2.3
Press down the button attached on the float chamber cover until the gasoline
spills out from the float chamber cover of the carburetter.
3.2.4
Close the air valve approximately by half (1/2).
3.2.5
Turn outwards the throttle twist grip to the end, then bring it back to 1/8 full
travel.
3.2.6
Step the kick starter for 4-5 times to make the crank shaft operate. The
cylinders suck in some mixed air and oil is supplied to part surfaces in advance which
need to be lubricated.
