BMW R nineT 2019, Rider'S Manual, Page: 96 / 206

Adjust adapters 2 to the width
of the pins inserted in the front
suspension.
Set the height of the front-
wheel stand to raise the front
wheel far enough off the
ground to turn freely.
ATTENTION
Auxiliary stand lifts clear if
the motorcycle is lifted too
high
Risk of damage to parts if vehicle
topples
When lifting, make sure that
the auxiliary stand remains in
contact with the ground.
If necessary, correct the height
of the front-wheel stand or the
auxiliary stand.
Engage the front-wheel stand
in the front suspension and
apply even pressure to push it
down to the ground.
Rear-wheel stand
Installing the rear-wheel
stand
Place the motorcycle on its
stand on firm, even ground.
Use the rear-wheel stand with
rear axle adapter. The rear-
wheel stand and its accessor-
ies are available from your au-
thorised BMW Motorrad Re-
tailer.
Use screws 1 to set the rear-
wheel stand to the desired
height.
Remove retaining disc
2 . To
do so, press release button 3 .
8
94
z Maintenance