BMW R 1200RT 2016 Page 158 Rider'S Manual Download

Page: 158 / 229

Close case

Pull release lever

all the way

up.
Close case lid and press down.
Ensure that no luggage is
trapped between lid and case.

NOTICE

The case can also be locked if
the lock is in the LOCK position.
Under such circumstances, en-
sure that the ignition key is not in
the case.

Push release lever

down,

continuing until it engages.

Turn key to LOCK position in
pannier lock and remove.

Remove case

Turn key to RELEASE position
in pannier lock.
Handle pops out.

Pull carry handle

up as far as

it will go.
Case is released and can be
removed.

Mount case

Fold up handle as far as possi-
ble.

156

Accessories

ProCarManuals.com

Summary of Contents for R 1200RT 2016






































































































































































































































Search results

Summary of Contents for R 1200RT 2016

Reviews:

Related manuals for R 1200RT 2016

Brands by name

Popular brands

BMW R 1200RT 2016, Rider'S Manual

Search results

Summary of Contents for R 1200RT 2016

Reviews:

Related manuals for R 1200RT 2016

Brands by name

Popular brands