BMW R 1200 R 2010, Rider'S Manual

Page: 40 / 160

Possible cause:
The motorcycle's speed has not
exceeded the threshold of ap-
prox.19 mph (30 km/h). The
TPC/RDC sensors do not send
their signal until after this speed
has been exceeded for the first
time (
78).
Watch TPC/RDC display at
higher speed. A permanent
fault has not occurred until the
general warning light also lights
up. In this case:
Have fault eliminated by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Possible cause:
There is a fault in the radio con-
nection to the TPC sensors.
Possible causes are radio sys-
tems in the surrounding area,
which interfere with the connec-
tion between the TPC control
unit and the sensors.
Watch the TPC display in an-
other environment. A perma-
nent fault has not occurred un-
til the general warning light also
lights up. In this case:
Have fault eliminated by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Sensor defective or
system fault
General warning light shows
yellow.
Warning triangle appears on
the display.
"
--
" or "
-- --
" is indicated.
Possible cause:
Wheels without installed TPC
sensors are mounted.
Retrofit wheel set with TPC
sensors.
Possible cause:
One or two TPC sensors have
failed.
Have fault eliminated by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Possible cause:
A system fault has occurred.
Have fault eliminated by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Battery of tire-inflation
pressure sensor weak
General warning light shows
yellow.
Warning triangle appears on
the display.
RdC
is indicated.
3
38
z Status indicators