BMW Mountain Bike Enduro Owner'S Manual Download

Page: 83 / 101

12.4 Taking the Bicycle by plane.

If you want to take your bicycle with you when you go on a trip by plane,

pack it in an appropriate bicycle suitcase

(a)

or in a bicycle cardboard

box

(b)

that you can obtain from your BMW partner. Special bicycle bags

often do not provide sufficient protection.

Pack the wheels in special wheel bags to protect them inside the

suitcase or cardboard box. Do not forget to take the necessary tools, a

torque wrench, bits and this manual with you to be able to assemble the

bicycle and to get it ready for use at your destination.

When you remove the wheels from a bicycle with disc brakes, be sure to

place pad spacers between the brake shoes. Otherwise they can come

out unintentionally and you will have difficulties in bringing them back

into position. Your BMW partner has a variety of brake pad spacers. Pull

the brake levers and fix them with a tape to the handlebars. This will

keep the system free of air.

12.5 Accessories.

In purchasing this high quality bicycle you laid the foundation for many

years and miles of enjoyable cycling. Whatever you are planning to do

with your bicycle, be sure to have proper equipment and to keep a few

tips in mind. Your BMW partner has a variety of useful accessories

(c)

offer enhancing both your safety and convenience.

The most important accessories for a successful bicycle ride are a tyre

pump and a small tool kit. The tool kit should include two plastic tyre

levers, the most commonly used Allen keys, a spare inner tube, a tyre

repair kit, your mobile phone and a little cash

(d)

. In this way you will be

well prepared in the event of a puncture or some other mishap.

Improper accessories may change the qualities of your bicycle

and even cause an accident. Therefore, before fitting any

accessories do contact your BMW partner and observe the

instructions regarding the intended use of your bicycle.

BMW recommends using BMW approved parts and accessories.

Please contact a BMW service centre for any inquiries regarding original

BMW parts and accessories, other BMW approved products as well as

professional advice in this respect.

Summary of Contents for Mountain Bike Enduro






































































































Search results

Summary of Contents for Mountain Bike Enduro

Reviews:

Related manuals for Mountain Bike Enduro

Brands by name

Popular brands

BMW Mountain Bike Enduro, Owner'S Manual

Search results

Summary of Contents for Mountain Bike Enduro

Reviews:

Related manuals for Mountain Bike Enduro

Brands by name

Popular brands