BMW Motorrad K 1300 GT Exclusive Edition Page 95 Rider'S Manual Download

Page: 95 / 176

Fuel can attack the material
of the windscreen, which

becomes dull or unsightly.
Wipe off the windscreen immedi-
ately if it comes into contact with
fuel.

Leaded fuel will destroy the
catalytic converter.

Use only unleaded fuel.

Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Open the protective cap.

Open the fuel tank cap with
the ignition key by turning it
counter-clockwise.

Refuel with fuel of the grade
stated below; do not fill the

tank past the bottom edge of
the filler neck.

Recommended fuel
grade

98 ROZ/RON (Premium plus
unleaded)
95 ROZ/RON (Premium
unleaded (fuel grade,
usable with power- and
consumption-related
restrictions))

Usable fuel capacity

approx. 24 l

Reserve fuel

4 l

Press the fuel tank cap down
firmly to close.
Remove the key and close the
protective cap.

Riding

Summary of Contents for Motorrad K 1300 GT Exclusive Edition

















































































































































































Search results

Summary of Contents for Motorrad K 1300 GT Exclusive Edition

Reviews:

Related manuals for Motorrad K 1300 GT Exclusive Edition

Brands by name

Popular brands

BMW Motorrad K 1300 GT Exclusive Edition, Rider'S Manual

Search results

Summary of Contents for Motorrad K 1300 GT Exclusive Edition

Reviews:

Related manuals for Motorrad K 1300 GT Exclusive Edition

Brands by name

Popular brands